The anticorrosion system ANTICOR Plast has been introduced in 2004 as an original product
of ANTICOR Company. It is A30 class coating which fulfilling the requirements of PN-EN12068 standard. Thanks to high quality of components and easy technology of application and also many important exploitation properties this system was approved by users in Poland and many countries
of Central Europe.

ANTICOR Plast system is used in many industries and branches. These materials are mainly used
in the gas industry, waterworks, petrochemical, air conditioning, shipbuilding and construction industries. They are used in the construction under and above the ground and also under water. This system is particularly recommended for fitting, flange and valve insulation where gasket changing necessity frequently occurred and anticorrosion coating should be removed. The part of anticorrosion mastic is recovered in this case.
Anticor Plast 701-40

ANTICOR PLAST 701-40 corrosion protection plastic tape is adequate for A30 class according to DIN-EN 30672 and PN-EN 12068.

• Synthetic cloth.

• Oil derivative plastic mass with corrosion inhibitors.

• Colour: Sahara
• Total thickness: ≥1,2mm.
• Operating temperature: -34oC do +30oC.
• Synthetic cloth thickness: up to 0,4mm.

• As corrosion protection of T-joints, curve sections of pipe, flanges and muff joints, pipe fittings and valves.
• As a protection of underground installations placed in wells.

• Good moisture resistance.
• Good electric strength.
• Compatible with bituminous and PE isolations.
• Easy to apply.

• Clean the surface thoroughly from rust, grease and moisture.
• Clean and tarnish present isolation ends with abrasive paper (about 10 cm length on each end). Bevel edges.
• Wrap the tape spirally around the protected surface with 50% overlap and lightly tension
• Even the surface of applied coating up manually or using trowel. Press to adjust the tape to any irregularity
of protected element.

Copyright by ANTICOR Sp. z o.o.
# Go top